|
|
|
|
F1B Components
|
|
| Product Number: | Fuselage Components
| Price: | $Reference
| |
|
The strong Kevlar motor tube is 30 mm OD at front and 28mm at rear, and is 20 inches long, 508mm, and it weighs .99 ounces including the front end connector, not included. The tail boom is 28.5 inches (724mm) long and .50 inches OD at the front, and .220 inches OD at the rear and weighs a mere .26 ounces, 7.4 grams. The connector is a precisely machined, light weight (.20 ounces, 5.7 grams) assembly to connect the motor tube to the tailboom. The motor tube cost is $35, the tail boom is $32, and the connector is $30.
|
| Product Number: | Super Sport
| Price: | $24.00 plus shipping
| |
|
Current batch is April/May 2005, sold in one pound boxes.
|
|
| Product Number: | F1B Boom Connector
| Price: | $30.00
| |
|
If you look closely at this picture, you can see the amount of machining done to make this come out at only .20 ounces, 5.7 grams. It is beefed up at the peg hole and the connector is precisely fit.
|
| Product Number: | Double stab control hammer
| Price: | $25.00
| |
|
This part is so light, .025 ounces, .70 grams that it can be used on Coupe, F1B, or F1J. The dual hammers are complete with torsion springs for positive return upon release. It may fit on the outside or inside of the tail boom. ID is .218 inches, and OD is .262 inches.
|
| Product Number: | Plug in prop spool
| Price: | $12.00
| |
|
.155 diameter shaft with cross pin of .090 diameter provides for a positive means of winding and torque transfer along with a spool to be gentle on the rubber loops. Total weight is .085 ounces, 2.4 grams
|
| Product Number: | F1B Wing Joiners
| Price: | $10.00
| |
|
Precision ground wing rods, 3.00 mm and 3.05mm, .
|
| Product Number: | F1B Motor Peg
| Price: | $4.00
| |
|
.237 inch OD x 1.1 inch length, with captivating knurled nut and .122 inch through hole. Weight is .04 ounces.
|
| Product Number: | F1B Stab Mount
| Price: | $15.00
| |
|
A very light weight low profile stab mount for F1B, .012 ounces (.34 grams). ID is .242 inches, and OD is .305. The stab sits .14 inches above the top of the tailboom.
|
| Product Number: | F1B prop start rod
| Price: | $20.00
| |
|
Kevlar sleeve to adhere to the Kevlar motor tube covering the control rod.
|
|
